Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
English (US)
CA French (Canada)
US English (US)
  • Home
  • Product Categories
  • Tillers

How to Add Oil to the HH0407 Tiller Gearbox

Written by Chad Veenkamp

Updated at June 1st, 2026

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • FAQ
  • Product Categories
    Lawn Mowers Power Stations Apparel & Safety Gear Generators Pressure Washers Tillers Fuel Additives
+ More

Table of Contents

Recommended Gear Oil

Applicable SKUs:
HH0407

Overview:
The gearbox already comes with oil from the factory and only requires maintaining once each season.

Recommended Gear Oil

HP-R High Temperature Compound Lithium Grease is the recommended gear oil.

 

Steps:

  1. Remove the pin and blades
  2. Unscrew the 2x screws
  3. Place the gun at the holes and fill them with grease, squeezing the gun 5-6 times for each hole
  4. Replace the screws and blades then re-insert the cotter pin.

Please see the below video for a visual how-to.

Your browser does not support HTML5 video.

 

guide instructions

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • How to Replace a Lawn Mower Carburetor Step-by-Step Video

Copyright 2026 – Midland Power.

Knowledge Base Software powered by Helpjuice

Expand